HOW TO CONFIGURE LINKSYS E-900/WIRELESS ROUTER
July 27, 2017
How to configure Linksys Smart Wi-Fi Router?
First of all, you need to connect the device to the power supply & internet line. Insert the power supply cord into the power port on the router and then internet connections were cable into the internet port then take an Ethernet cable and connect the router to the computer. Open the browsers like (chrome, Mozilla, Microsoft edge). Go to the address bar and type 192.168.1.1 or 192.168.0.1.Type the username and password needed to access the Linksys smart Wi-Fi panel (admin/admin or admin/password) and click the login button to start the initial setup now the page will open.
LINKSYS router supports both 2.4GHZ and 5GHZ wireless connections. It is recommended that you choose any one and then click ok. Now you can create a (wireless network name) SSID for a 2.4GHZ network (state name) and (Wireless Security) choose Enable Security (WPA-PSK/ WPA-PSK2) and create a PSA password and click next to finish. And same to connect with the 5 GHz band as well. And then follow the on-screen instructions to set up the LINKSYS smart Wi-Fi account. Use Linksys smart Wi-Fi to easily manage your router settings like (change the name & passwords, set up the guest account and connect your devices to the network).
How to reset the Linksys Smart Wi-Fi Router?
There are two ways to reset the router:
- Go to the router page Open the factory default page
- Press and hold the reset button for 5 seconds and then wait for the router reboot.
HOW DO I CONNECT THE DEVICES THROUGH WIFI WITH E900?
If the router is not working properly, so, first of all, you can try one thing. Unplug the modem & router for 4 to 5 minutes and then plug-in back the modem & router & reset the button for 30 seconds and try to connect again. If still, it is not working then you can download the firmware and connect the router back to the computer and access the user interface & you need to perform the upgrade again.